Tên sản phẩm: | Tridonic Emergency Module - EM PRO EZ-3, 220–240V 50/60Hz |
---|---|
Mã sản phẩm | EM PRO EZ-3, 220–240V 50/ |
Giá mới | Giá liên hệ |
Nhóm sản phẩm: | Tridonic Emergency Module |
Lượt xem | 3597 |
Product description
• Emergency lighting supply unit with DALI interfaceand automatic test function
• For linear and compact fluorescent lamps
• Low-profile casing (21 x 30 mm cross-section)
Properties
• DALI interface for testing and feedback
• 1 or 3 h rated duration
• Compatible with all electronic ballasts(dimmable and non-dimmable)
• 5-pole technology: 4-pole lamp changeoverand delayed power switching for the ballast
• High-frequency ac operation of the lamp
• Power control technology ensures maximum emergency ballastlumen factors for all lamps on a given module
• Gentle on the lamp thanks to permanentcathode heating in emergency mode
• 5.5 min. boost start for rapid heating of the lamp, morelight in the startup phase and optimum lamp life
• Standard and high ballast lumen factor for 1 hour types
• Electronic multi-level charge system
• “Rest mode” function
• Addressing function, patented (“EZ easy addressing”)
• EZ addressing tool can be supplied
• Deep discharge protection
• Short-circuit-proof battery connection
• Polarity reversal protection for battery
• Two-colour status display LED• Maximum ballast lumen factors (BLF) for all lamps
Tests:
• Status of the battery
• Status of the lamp
• Charge condition
• Function test
• Service life test
Batteries
• High-temperature cells
• NiCd or NiMH batteries
• D or Cs cells
• Blade terminals for simple connection
Technical data:
Rated supply voltage: |
220 – 240 V |
Mains frequency: |
50 / 60 Hz |
Mains current: |
60 mA |
Rated power: |
< 10W |
Overvoltage protection |
320V (for 1h) |
Maximum operating voltage (U-OUT of the ECG |
460V |
|
15/10 h |
Discharge current, Standard BLF |
1.1A |
Discharge current, High Output BLF |
2.2A |
Leakage current (PE): |
0.5 mA |
Ambient temperature ta : |
0 ... +60°C |
Max. casing temperature tc |
70°C |
Mains voltage changeover threshold: |
according to EN 60598-2-22 |
Min. lamp starting temperature (emergency mode): |
-5°C |
Type of protection: |
IP20 |